Skip to content

Zamp Keystone Cougar Off The Grid Complete Integration Kit (Solar Prep OTG)

$729.99
+ FREE Shipping!

Need help? Ask our specialists:

Overview — Zamp Keystone Cougar Off The Grid Complete Integration Kit (Solar Prep OTG)

Keystone’s OTG or Off The Grid package is a fully engineered OEM solar power system. This eliminates the trial and error of cobbling together a half-baked hard to understand solar power solution. Now available on Cougar, Cougar Half-ton, Passport, and Bullet. Contact KeyConnect to learn if you have the OTG system on your RV. 

When equipped with the Off The Grid Solar Prep option from the factory a quick-connect solar roof cap making it simple and easy to expand your solar setup. The Zamp Solar charge controller prep is located in a pass-through storage compartment for easy access and installation. 

What is the OTG Solar Prep:

Because select Keystone brands come prepped for Zamp Solar power systems, owners will save time and money when the decision is made to take things to the next level and go solar. Travel trailers and fifth wheels with OTG prep include factory wiring for up to 3 Zamp Solar Legacy 170 Watt Solar Panels, or 510 total watts on the roof.

A Zamp Solar sidewall port for portable OBSIDIAN® SERIES solar panels; connections for a pure sine wave power inverter charger and batteries located in the pass-through storage; and up to five outlets prepped for inversion, depending on the model. With OTG prep you have the flexibility to pick and choose aftermarket components that meet your specific needs.

Cougar Off The Grid Complete Integration Kit for OTG Solar Prep Includes: KIT1016

  • 1x Zamp Solar 40 Amp PWM Solar Controller

  • 1x 170-Watt Zamp Solar LEGACY SERIES Panels (Download Techincal Spec Sheet)

  • 1x Quick-connect solar plug

  • 1x Stainless steel mounting hardware and universal feet

an RV, a charge, controller, and asolar panel

Resources — Zamp Keystone Cougar Off The Grid Complete Integration Kit (Solar Prep OTG)

Documents — Zamp Keystone Cougar Off The Grid Complete Integration Kit (Solar Prep OTG)

📙 Zamp KIT1016 Product Manual 🎖️ Zamp KIT1016 Warantee 📏 RV Sizing Chart 📄 Zamp KIT1016 Spec Sheet

Videos — Zamp Keystone Cougar Off The Grid Complete Integration Kit (Solar Prep OTG)

🛠️ Zamp Roof-Mounted Kit Installation 🇺🇸 Zamp, US-Made Solar Panels 🏆 Introducing Zamp KIT1016 📽️ Zamp Solar — Story

Warranty — Zamp Keystone Cougar Off The Grid Complete Integration Kit (Solar Prep OTG)

OffGrid Harbor is an Authorized Zamp Solar Dealer

Includes all applicable Manufacturer Warranties

Ships direct from manufacturer

Additional Lifetime support from our specialists

FAQs — Zamp Keystone Cougar Off The Grid Complete Integration Kit (Solar Prep OTG)

Q: Can I connect two charge controllers to the same battery bank (e.g. combine a roof mount system and a portable kit)?

Answer: Yes, two independent charge controllers can be connected directly to the battery as long as both controllers are set to the same battery type. The charge controllers will not work properly if wired in series, one to the other.

Q: Is the Zamp Solar port reverse polarity?

Answer: No, but they are different from other brands of solar ports because all of our SAE plugs are polarity-protected for safety reasons. That means the positive pin on all of our SAE plugs is set back and covered to prevent accidental contact that could damage your panel, short your battery, or give you a pretty nasty shock. So, because of the polarity protection on our plugs, Zamp Solar ports are only compatible with Zamp Solar SAE plugs.

Q: What does the b01 601 error message on my charge controller mean?

Answer: This common error code means the charge controller can’t see the battery bank. The most common cause of this is a bad connection between the charge controller and the battery bank

Q: Why isn’t my solar system charging my battery?

Answer: When a solar system isn’t working, the most common culprit is a wiring problem. Our troubleshooting document can help you identify the disconnect and get it fixed. If you’re still having issues, please contact us for further assistance.

Q: What batteries should I use?

Answer: Any type of 12-volt deep cycle battery (lithium, gel, AGM, conventional lead-acid (wet), and calcium) will work with your Zamp Solar system. If you choose to go with two 6-volt batteries, make sure that you use two of them wired in series to create a 12-volt battery bank.

Q: What size kit do I need to power my RV?

Answer: Everybody’s needs are different, but we can certainly provide some insight into what size solar kit typically works for various sizes of RVs. Check out our infographic to see which of our kits might work best for you.

Q: I have a Zamp Solar Ready sticker on the side of my RV, what does that mean?

Answer: If an RV is “solar ready,”it means that the RV came pre-wired for our solar products with either a 3-port roof cap, a single port roof cap, or a side-wall port. However, each manufacturer does it slightly differently—some include full wiring, while others only wire from the roof to the batteries.

Q: How do I clean Zamp Solar panels?

Answer: We recommend to use a mixture of warm water and a good quality automotive soap applied with a soft cloth twice a year or more depending on your location. Do not use any harsh chemicals or a power washer when cleaning the panels as this could damage the anti reflective coating applied to the glass.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)