Overview — Renogy Rover Li 30 Amp MPPT Solar Charge Controller (RNG-CTRL-RVR30-US)
The Renogy 30A Rover MPPT Charge Controller is the most efficient type of charge controller. With up to 99% tracking efficiency, the Rover ensures maximum power point solar charging that gets more energy to your battery bank. Capable of automatically detecting 12V/24V lead acid battery systems, this crucial component is preset to also work with Gel, Flooded (wet cell), and Sealed batteries（manual setting is required for 24V Lithium battery）. When paired with the Renogy BT-1 Module and DC Home app you can view system performance in real-time and make parameter changes without having to get up!
Advanced Ultra Fast Maximum Power Point Tracking
Renogy Innovative MPPT technology with high tracking efficiency of up to 99% and peak conversion efficiency of 98%. It is the best charging solution even in cloudy environments where the max power point of the solar panels will fluctuate all day.
12V/24V System Voltage Automatic Identify
The Renogy Rover 30A MPPT Charge Controller supports both 12V and 24V systems and can automatically identify system voltage once connected to a Sealed, Gel, AGM, and Flooded battery (manual setting is required for 24V Lithium battery).
Temperature Monitor and Compensation
Die-cast aluminium design ensures excellent heat dissipation. Fitted with a Remote Temperature Sensor, the Rover MPPT Charge Controller can measure battery temperature in real-time and use this data for very accurate temperature compensation, assuring stable and constant charging.
Intelligent Charging Protection
Renogy Rover MPPT provides 4-stage charging (Bulk, Absorption, Float, and Equalization) and features a comprehensive set of electronic protection functions such as stopping reverse current at night (from the battery back to the solar panel), automatic cut off to prevent over-charging and deep discharge, solar panel over voltage, over load, short circuit and reverse polarity protection.
Max. Solar Input Power 12V/400W 24V/800W
The Rover MPPT charge controller can work with standard off-grid 12/24V solar panels with high voltage or multiple panels with voltage up to 100V. In particular, this controller will significantly increase the efficiency of a solar system where the solar panel voltage is much higher than the battery voltage.
Upgraded Energy Monitoring Experience
By adding the Renogy ONE M1 to your system, Wi-Fi connectivity uploads energy status to the data cloud in real time. Now you can monitor the system from Renogy ONE M1 when you are at home, or through the DC Home app on your phone when you are out to explore.
Resources — Renogy Rover Li 30 Amp MPPT Solar Charge Controller (RNG-CTRL-RVR30-US)
Documents — Renogy Rover Li 30 Amp MPPT Solar Charge Controller (RNG-CTRL-RVR30-US)📊 Data Sheet — Renogy MPPT Charge Controller (RNG-CTRL-RVR30-US) 📙 Manual — Renogy MPPT Charge Controller (RNG-CTRL-RVR30-US) 🎖️ Warranty — Renogy MPPT Charge Controller (RNG-CTRL-RVR30-US)
Warranty — Renogy Rover Li 30 Amp MPPT Solar Charge Controller (RNG-CTRL-RVR30-US)
✓ OffGrid Harbor is an Authorized Renogy Dealer
✓ Includes all applicable Manufacterer Warranties
✓ Ships direct from manufacterer
✓ Additional Lifetime support from our specialists
Specs — Renogy Rover Li 30 Amp MPPT Solar Charge Controller (RNG-CTRL-RVR30-US)
|Nominal System Voltage||12/24V (Auto-Detect for Non-Lithium types)|
|Rated Charge Current||30A|
|Max. PV Input Voltage||100 VDC|
|Max. PV Input Power||12V/400W, 24V/800W|
|Power Consumption||＜100mA/12V; ＜58mA/24V|
|Max Battery Voltage||32V|
|Electrical Protection||Overcharging, over-discharging, overload, and short circuit.Capable of charging over-discharged lithium batteries.|
|Operating Temperature Range||-35°C to 45°C; -31°F to 113°F|
|Storage Temperature Range||-35°C to 75°C; -31°F to 167°F|
|Operating / Storage Humidity||≤ 90%, No Condensation|
|Dimensions||210 x 151 x 59.5 mm; 8.27 x 5.94 x 2.34 in|
|Weight||1.4kg / 3.08 lb|
|Max. Terminals Size||8 AWG 10mm2|
|FCC Class B Part 15 Compliant||YES|
|Material and workmanship warranty||2 Year|
|Compatible PWM Charge Controller||RNG-CTRL-WND10/RNG-CTRL-WND30-LI/RNG-CTRL-ADV30-LI|
|Compatible MPPT Charge Controller||RNG-CTRL-RVR20/RNG-CTRL-RVR30/ RNG-CTRL-RVR40/RNG-CTRL-RVR60S/ RNG-CTRL-RVR100|
|Compatible App||Renogy DC Home App available in both the App Store and Google Play|
|Communication Range||≤82ft (25m)|
|Cable Length||16.4 ft (5.00m )|
|Dimensions/repeat2||2.65 X 1.38 X 0.55 in (67.3 X 35 X 14 mm)|
|Weight/repeat3||4.58oz (130g )|
|Operation Temperature||-4°F to 185°F (-20℃~85℃)|
|Standby Power Consumption||0.04W|
|Operating Power Consumption||0.05W|
|Serial Baud Rate||Fixed Baud Rate 9600bps|
|FCC Class B Part 15 Compliant/repeat6||YES|
|Material and workmanship warranty/repeat8||2 Year|