The Renogy 2000W Pure Sine Wave Inverter Charger w/ LCD Display is ideal for RV or standalone. The Renogy 2000W Pure Sine Wave Inverter Charger not only acts as a DC to AC inverter that allows you to power your household appliances but also charges and maintains a battery bank when connected to shore power and is now compatible with Lithium batteries. With a low transfer time, power remains uninterrupted when switching from the battery to shore power. The advanced Renogy Pure Sine Wave technology will protect and extend the life of your electronics and appliances. The Renogy 2000W Pure Sine Wave Inverter Charger is a perfect backup power source!
Please Note:
The listed dimensions we provide are solely the device body dimensions. Please do reserve space for cable grommets and installing cables.
Powerful versatility, it is ready for 12V Gel, AGM, Sealed Lead Acid (SLA), Flooded (FLD), Calcium (CAL), Lithium-iron Phosphate (LI), and programmable for custom batteries through the USER type.
Advanced Pure Sine Wave technology provides high-quality AC power equivalent to grid power to protect your household appliances and electronic equipment, which is especially suitable for sensitive electrical appliances.
The Renogy 3000W pure sine wave inverter charger is equipped with a 4-Stage(Bulk stage, Boost stage, Float stage, and Equalization) battery charger with a configurable charging current between 5A and 75A to make sure it optimally and automatically charge to 100%. It only takes 1.5 hours to fully charge a 100Ah battery.
The LCD display can visually see the status of the inverter and perform programmable operations. The PCL inverter charger series is fully programmable with more than 20 features that can be customized such as input/output voltage range and battery charging current.
This inverter comes with a 16.4ft remote control and a 9.9ft battery temperature sensor. The Temperature Sensor can compensate the battery voltage affected by temperature so that the charger recognizes the voltage more accurately and assures stable and constant charging to the battery.
To Access the main panel, unscrew the terminals on the outside of the side panel. Steps as follows: 1. Flip inverter power to the 'OFF' position 2. Unscrew the screw terminals along the edge of the side plate 3. Gently remove DC Side plate to expose DC Terminals 4. Connect the positive and negative DC Cables to their respective terminals and run them through the side panel
The following are the minimum battery quantities to operate Renogy power inverters. This is ONLY for 12V applications.
✓ OffGrid Harbor is an Authorized Renogy Dealer
✓ Includes all applicable Manufacturer Warranties
✓ Ships direct from manufacturer
✓ Additional Lifetime support from our specialists
| Continuous Power | 2000W |
| AC Output Voltage Range | 100~120VAC configurable, 5V interval |
| DC Input Voltage Range | 10~16 VDC |
| Nominal Efficiency | > 90% Peak |
| Surge Power (1 second) | 6000W |
| Output Frequency (Nominal) | 50/60 Hz |
| Output Waveform | Pure Sine Wave |
| No Load Power Consumption: Normal | <20W; Power Saving: <15W |
| Output Current | 5-65A configurable, 5A intervals |
| Nominal Input Voltage | 120VAC |
| Input Frenquency Range | 40Hz - 70Hz |
| Optimal Efficiency | >85% |
| Input Voltage Range | 90-138 VAC |
| Input Wave Form | Sine Wave (Utility or Generator) |
| Transfer Time | ~ 10ms |
| Transfer Rating | 30A Automatic Transfer Switch |
| Battery Types | GEL, AGM, SLA, FLD, CAL, LI, USER |
| Operating Temperature | 0 ~ 40°C / 32 ~ 104°F |
| Storage Temperature | -30 ~ 70°C / -22 ~ 158°F |
| Humidity | 0% ~ 95% |
| Noise | <50dB |
| Dimensions | 20.1 x 11.2 x 7.6 in / 510 x 285 x 193 mm |
| Weight | 51.1 lbs / 23.2 Kg |
| Inverters | 1-year material and workmanship warranty |
| Accessories | 1-year material warranty |
